FDA material PP pleated membrane filter

FDA material PP pleated membrane filter 1.Flushed with EUI pure water2.100% integrity test3.Bubble point testFeature:-- Excellent performance of chemical compatibility-- Hydrophillc membrane with high flow-- Non-fiber releasing according to pharmaceutics and food industry requirements-- Experiencing 100% integrity test

Featured Products

FDA material PP pleated membrane filter 

1.Flushed with EUI pure water
2.100% integrity test
3.Bubble point test

-- Excellent performance of chemical compatibility
-- Hydrophillc membrane with high flow
-- Non-fiber releasing according to pharmaceutics and food industry requirements
-- Experiencing 100% integrity tested
-- Flushed with ultrapure water

-- FDA compliance material
Food and beverage
Oil industry
Chemical industry
The DLM series-PP Pleated filter cartridge deliver high efficiency and consistent filtration of fluids in a wide range of critical applications.They are constructed of pleated melt blown filter media tahe provides removal of particals from 0.1 to 50um.The high surface area ensures long service life and low initial pressure drops.All cartridge hardware components are made from high purity polypropylene materials for use in critical process application.


Outside Diameter:2.7''(69mm)
Length:  9.75'',10'',20'',30'',40''
Filter media:PP
Support Layer/Cage/Core/ End caps :Polypropylene (PP)
Seal Material :Silicone,EPDM,NBR,Vilton,Teflon,E-FKM
Removal Rating: 0.1um,0.22um,0.45um,0.5um,0.8um,1.2um 
Maximum Operating Temperature80°C  
Maximum Differential Pressure : 4.0Bar@25°C
Maximum Differential Pressure(Reverse Direction):2.0Bar,25°C
Maximum temperature sterilization :5times, 20minutes cycles at 120°C
FDA Material PP Pleated Membrane FilterFDA Material PP Pleated Membrane FilterFDA Material PP Pleated Membrane Filter

Outside Diameter: 2.7''(69mm)
Length:   9.75'',10'',20'',30'',40''
Filter media: PP
Support Layer/Cage/Core/  End caps  : Polypropylene (PP)
Seal Material : Silicone,EPDM,NBR,Vilton,Teflon,E-FKM
Removal Rating:  0.1um,0.22um,0.45um,0.5um,0.8um,1.2um 
Maximum Operating Temperature 8 0°C    
Maximum Differential Pressure  :  4.0Bar@25°C
Maximum Differential Pressure(Reverse Direction): 2.0Bar,25°C
Maximum temperature sterilization  : 5times, 20minutes cycles at 120°C

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours