![Darlly 10 Micron Cartridge Sediment Filter PP Spun Filter Cartridge](https://img3.grofrom.com/filterqdsupply/870258309a855f592e66062741e3d60c.webp)
![Darlly 10 Micron Cartridge Sediment Filter PP Spun Filter Cartridge](https://img3.grofrom.com/filterqdsupply/b64729318deaac06541019e6a4196b50.webp)
DLPP series PP melt blown filter cartridge
Features
- Three layers structure cartridge offers high dirt holding capacity,longerservice life
- Formed by thermal bond without using any binders and adhesives.
- 100% Pure Polypropylene will not cause any pollution to water
- Wide Chemical compatibility
- Groove design to extend the filtration surface area.
- All kinds of adaptors are available.
- FDA compliance material
Specifications
Outside Diameter | 63mm, 115mm or up to customers' request |
Inside Diameter | 28mm,30mm |
Length | 9.75",9.87",10, 20, 30, 40, 50, 60 |
Filter media | PP |
End caps | PP |
Cores | PP |
Gaskets/O-ring | Silicone, EPDM, NBR, Viton |
Performance
- Removal Rating: 1,3,5,10,25, 50,100,150 μm
- Maximum Differential Pressure: 2.0 bar @ 21° C
- Maximum Operating Temperature: 82° C
CodeXSurface TypeCode= Removal RatingCode# LengthCode+End Cap Type
Blank No Groove11µm9759.75"(248mm)Blank DOE(No End Caps)
G Deep Groove33µm9879.87(250mm)"F DOE(Glasket/Glasket)
MG Mini Groove55µm1010"(254mm)M 222/Flat
Code* Outside Diameter1010µm2020"(508mm)P 222/Fin
Blank 2.5"(63mm)2525µm3030"(762mm)T 226/Flat
BB 4.5" (115mm)5050µm4040"(1016mm)Q 226/Fin
7575µm5050"(1270mm)Code&Seal Material
100100µm6060"(1524mm)SSilicone
150150µmEEPDM
BNBR
VViton
![Darlly 10 Micron Cartridge Sediment Filter PP Spun Filter Cartridge](https://img3.grofrom.com/filterqdsupply/8c5b310277e3653e9f49884aabf44852.webp)
![Darlly 10 Micron Cartridge Sediment Filter PP Spun Filter Cartridge](https://img3.grofrom.com/filterqdsupply/8c5b310277e3653e9f49884aabf44852.webp)