PP Filter Cartridge
Introduction:
The filtration media of PP micropore filter cartridge is superfine PP fibre membrane. It is a fixed and depth filter cartridge with a wide range of pore size from 0.1um to 60um, the materials comply with FDA related requirements. It is the first choice of pre-filtration due to its unique low differential pressure, high flow rate and long service life feature. The structure of PP has stable performance and wide chemical compatibility.
Specification:
Filter medium: PP fiber membrane
Support layer: PP
Filter cage: PP
Pore size:0.1, 0.22, 0.45, 1.0, 3.0, 5.0, 10, 20 (um)
Length: , 5", 10", 20". 30", 40"
Sealing material: Silastic, NBR, EPDM, Viton
Airtight method: thermal bonding technique
Effective filtration area: 0.4~0.7square meter/10"
Diameter:68mm
Max. operating temperature: 60ºC,(△P≤0.01Mpa)
Max. positive pressure: 0.42Mpa(23ºC)
Max. back pressure: 0.28Mpa(23ºC)
PH value: 1--13
Sterilizing temperature: 121ºC 30min
Others: special requirement of diameter and end caps can be customized
Typical Applications:
Medical industry; Chemical industry; Food industry; Electronic industry and others
Introduction:
The filtration media of PP micropore filter cartridge is superfine PP fibre membrane. It is a fixed and depth filter cartridge with a wide range of pore size from 0.1um to 60um, the materials comply with FDA related requirements. It is the first choice of pre-filtration due to its unique low differential pressure, high flow rate and long service life feature. The structure of PP has stable performance and wide chemical compatibility.
Specification:
Filter medium: PP fiber membrane
Support layer: PP
Filter cage: PP
Pore size:0.1, 0.22, 0.45, 1.0, 3.0, 5.0, 10, 20 (um)
Length: , 5", 10", 20". 30", 40"
Sealing material: Silastic, NBR, EPDM, Viton
Airtight method: thermal bonding technique
Effective filtration area: 0.4~0.7square meter/10"
Diameter:68mm
Max. operating temperature: 60ºC,(△P≤0.01Mpa)
Max. positive pressure: 0.42Mpa(23ºC)
Max. back pressure: 0.28Mpa(23ºC)
PH value: 1--13
Sterilizing temperature: 121ºC 30min
Others: special requirement of diameter and end caps can be customized
Typical Applications:
Medical industry; Chemical industry; Food industry; Electronic industry and others
| Material of construction | |
| Membrane | Polypropylene |
| Support & Drainage | Polypropylene |
| Core & Cage | Polypropylene |
| End Caps | Polypropylene |
| O-rings/Gasket | Silicone/EPDM/Viton/TEV |
| Sealing Technology | Thermal Bonding, No Adhesives |
| Dimensions | |
| Outer Diameter | 68mm (2.67 in) |
| Length | 5", 10", 20", 30", 40" |
| Filtration Area | |
| ≥ 4.0 ft2 /10" (0.41 m2 /250mm) | |
| Removal Ratings, μm | |
| 0.1, 0.22, 0.45, 1.0, 3.0, 5.0, 10, 20 | |
| Maximum Operating Temperature | |
| A: PP<60ºC(140ºF) | |
| B: PP with stainless steel lined end cap<85ºC/185ºF | |
| C: PP with stainless steel lining<95ºC/203ºF | |
| Maximum Forward Differential Pressure | |
| 4.2 bar @ 23 ºC/60.9 psid @ 73.4ºF | |
| 1.5bar@85 ºC/21.7 psid @ 185ºF | |
| 0.6 bar @ 95 ºC/8.7psid @ 203ºF | |