DLM Series PTFE pleated membrane filter (SGS test with FDA standard)
1.Flushed with EUI pure water
2.100% integrity test
3.Bubble point test
General Description:
The DLM series-PP Pleated filter cartridge
· Excellent performance of high temperature-resistance, repeat steamability in situ.
· Hydrophobic membrane with high flow.
· Low pressure drop, high flow rate, long service life
· 100% integrity tested
· Non fiber-releasing
Application:
Fermentation tank,
vent filter of hold tank.
Electronic industry
Semiconductor: ultrapure gas filtration
Chemical industry
| Outside Diameter: | 2.7''(69mm) |
| Length: | 9.75'',10'',20'',30'',40'' |
| Filter media: | PTFE |
| Support Layer/Cage/Core/ End caps : | Polypropylene (PP) |
| Seal Material : | Silicone,EPDM,NBR,Vilton,Teflon,E-FKM |
| Removal Rating: | for liquid : 0.2um, 0.45um, for gas :0.02um, 0.05um |
| Maximum Operating Temperature | 90°C |
| Maximum Differential Pressure : | 4.2Bar@25°C |
| Maximum Differential Pressure(Reverse Direction): | 2.0Bar,25°C |
| Maximum temperature sterilization : | 121°C every 30 30minutes,100 times |
| other | When filter the air, pressure is 2 bar ,start pressure 100Mbar ,10filter can flow 300NM³/h |